山東裝載機所有操作要在油溫降低后進行
[ 發布日期：2023-01-07 15:10:28 ] 來源:永保機械 瀏覽：565次
1、山東裝載機http://www.zjj678.com/接油容器放在放油螺栓下，取下螺栓，并放油，為防止山東裝載機郵箱內油突然流出，松開螺塞，并逐漸取下螺栓，放油后，裝在螺塞并擰緊。
Shandong loaders drip container placed under the oil drain plug, remove the bolt, and put the oil, in order to prevent a sudden outflow of oil Shandong loaders mailbox, release the plug, and gradually remove the bolts, put the oil, the
mounted screw plug and tighten.
2、山東裝載機接油容器放在山東裝載機變速箱濾油器下，取下山東裝載機變速箱濾油器放油螺塞，放油后擰緊螺塞。
Shandong loaders drip container placed under the Shandong loader gearbox oil filter, remove the filter Shandong loader gearbox oil drain plug after the oil drain plug and tighten.
3、取下山東裝載機螺塞、蓋，并取出濾網，清除粘在山東裝載機濾網上的贓物，然后用柴油或清洗油清洗，如濾網損壞，更換。
Remove Shandong Loader plug, cover, and remove the filter, remove the filter stick to the stolen goods Shandong loader, then wash or clean diesel oil, such as the filter is damaged, replace it.
4、重新安裝山東裝載機http://www.zjj678.com/濾網，經加油口注入一定數量的機油，加油時，檢查油位。
Reinstall Shandong loaders filter, the fuel filler into a certain amount of oil, refueling, check the oil level.
