裝載機輪胎如何處理？
[ 發布日期：2023-01-07 15:10:28 ] 來源:永保機械 瀏覽：687次
裝載機的輪胎如果處理不當，會造成輪胎會爆炸，下面永保機械的有關專家就給大家介紹一下輪胎的處理要求。
1、裝載機使用指定的輪胎，并充氣到規定壓力。充氣時，應不斷檢查輪胎氣壓，防止充氣氣壓過高充氣管上應有能固定到氣門上的管卡，并禁止任何人進入工作區域。
Shandong loader using the specified tire, and inflated to a predetermined pressure. Inflated, should continue to check the tire pressure, to prevent excessive inflation pressure due inflatable tube can be fixed to the tube valve on the
card, and prohibits any person entering the work area.
2、裝載機輪轂如果固定不好，輪胎充氣時輪轂可能會產生爆裂。輪胎壓力下降速度異?；蜉嗇炑b置異?，F(xiàn)象都是輪胎輪轂有問題的征兆。這種情況下，要請輪胎維修站的人員進行維修。
Shandong wheel loaders bad if fixed, wheels may have burst tires inflated. Tire pressure drop velocity anomalies or hub device anomalies are tire wheel problematic symptoms. In this case, tire repair station to ask the staff for maintenance.
3、裝載機高速行駛或繁重作業后，要調整輪胎的壓力。禁止對安裝在輪胎上的輪轂進行加熱或焊接，禁止將輪胎靠近火源。
After high speed or heavy Shandong loader operations, to adjust tire pressure. Prohibition on the hub attached to a tire is heated or welding. Prohibit the tire near the fire.
