裝載機輪胎保護鏈安裝步驟

裝載機由于工作環境比較惡劣，因此橡膠輪胎比較脆弱，裝載機保護鏈則可以對輪胎進行保護，減少輪胎本身的損耗。那么裝載機輪胎保護鏈如何安裝呢？

1、將裝載機停放在平坦地段，并將輪胎內的氣放出三分之一，將輪胎保護鏈打開，平鋪在要安裝的車輪正前方。
The Shandong loader parked on a flat area, and air inside the tire third release, the tire protection chain opened tile to be installed in front of the wheels.

2、把裝載機輪胎保護鏈頂部的開口菱形節和開口節卸下備用，開動山東裝載機裝載機使其駛?cè)氡Ｗo(hù)鏈的中間部位，并使其停在保護鏈頂部的15-20公分處，保護鏈頂部兩端掛上一根鐵絲，將其掛在輪胎的文理上。
The opening section of Shandong diamond top loader tire protection chain and remove the spare opening section, starting Shandong loaders loaders protect it into the middle of the chain, and it stopped at the top of the protective chain of 15-20 centimeters, protect top ends of the chain hung a wire, which hung on the Arts and the tire.

3、開動裝載機并由兩人各抓住保護鏈的一側，隨車輪的滾動使保護鏈將整個車輪包起。
Shandong loader start by two men grabbed the side of protecting the chain, with the scroll wheel of the protective chain will wrap the entire wheel.

4、用撬棍將裝載機保護鏈整理一下，使其均勻的包裹住輪胎，把菱形開口節按卸下時的部位重新按上，并將山東裝載機保護鏈兩端按其花紋連接好。
The Shandong loader with a crowbar protection chain tidy, wrap it evenly tires, the diamond-shaped opening section by removing the parts when pressed again on both ends of the Shandong loader protection chain and its pattern connected.